System Identification at the Extreme Edge for Network Load Reduction in Vibration-based Monitoring
| Autor: | Federica Zonzini, Vasilis Dertimanis, Eleni Chatzi, Luca De Marchi |
|---|---|
| Přispěvatelé: | Zonzini, Federica, Dertimanis, Vasili, Chatzi, Eleni, De Marchi, Luca |
| Rok vydání: | 2022 |
| Předmět: |
Monitoring
Vibration analysis Computer Networks and Communications Time series analysi Edge processing Parametric system identification Vibration Standard Computer Science Applications Hardware and Architecture Data compression Structural Health Monitoring Signal Processing Internet of Thing Tall-skinny QR decomposition Information Systems Sensor |
| Zdroj: | IEEE Internet of Things Journal |
| ISSN: | 2327-4662 |
| DOI: | 10.1109/jiot.2022.3176671 |
| Popis: | Mechanical complexity, wide dimensions and big data volume may hamper the implementation of Internet–of–Things (IoT)–enabled Structural Health Monitoring (SHM) systems. In particular, one of the most important challenges is the reduction of the data payload to be transmitted over the monitoring network. Addressing the problem in the context of vibration–based SHM, this work explores System Identification (SysId) as an innovative strategy for data compression at the extreme edge. Indeed, SysId is a signal processing technique aiming at finding a very reduced (i.e., less then one tenth of the total signal length) set of meaningful parameters, which can provide an alternative, but yet completely equivalent, frequency characterization of the structure. In the proposed approach, an embedded system–oriented adaptation of the Sequential Tall–Skinny QR decomposition (eS–TSQR) from the dense linear algebra domain has been exploited to tackle both the memory and computational complexity of the involved algorithms. This yielded to the embodiment of input–output and output–only SysId models into a resource constrained device (i.e., an STM32L5 microcontoller unit), targeted on low–power and low–cost SHM applications, proving high effectiveness for the structural assessment of civil and industrial plants. Besides, a cost–benefit analysis is also presented, in which the energy saving brought by SysId running in a sensor–near manner is comprehensively measured against the power consumption due to data transmission, as implied by state–of–the–art communication protocols for IoT. Results demonstrate that SysId is 1.19x and 2.78x less energy demanding (with a payload reduction of 9x and 45x) w.r.t. compressed sensing-driven and compression–free solutions, respectively. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|