Autor: |
Alok Kumar Singh, A. Golwalkar, K. Manoranjan, S. Doodraj, A. Pandita, C. M. Lang |
Rok vydání: |
2016 |
Předmět: |
|
Zdroj: |
Day 1 Mon, November 14, 2016. |
DOI: |
10.2523/iptc-18763-ms |
Popis: |
Wellbore ballooning (or wellbore breathing) is a pertinent drilling issue in exploration wells where the formation lithology, geo-mechanics, pore pressure and fracture pressure regime is not fully understood. This phenomenon is generally observed in formations with micro-fractures. While the pumps are on the ECD is just sufficient to open up the natural micro-fractures allowing the mud to enter the formation. As the pumps are switched off the dynamic pressure effect is lost and the static mud weight is insufficient to keep the fracture open, resulting in the mud lost in the formation to flow-back as the fracture closes. A flow back of mud is observed on the surface with pumps off, which can be misinterpreted as wellbore influx or kick. Misinterpreting a wellbore ballooning phenomenon as a well kick can lead to the application of standard well control procedure which can aggravate the problem and may have severe implications even to the extent of well failing to meet its objective and being prematurely abandoned. This paper presents case studies of two wells, viz. NJ North East-1 and Raag Deep Main-1, drilled by the operator in the same block. Severe ballooning was observed in the first well wherein delayed identification of the phenomenon resulted in high NPT and consequential cost impact. The lessons learnt from this experience were implemented in the second well with similar ballooning issues, along with close real-time well monitoring while drilling resulting in smooth drilling operation and successful achievement of objectives as per plan This paper also summarizes suitable in-field drilling practices to be adopted and implemented to mitigate wellbore ballooning, which can be a low-cost alternative to expensive technologies used to counter this phenomenon. |
Databáze: |
OpenAIRE |
Externí odkaz: |
|