| Popis: |
As an advanced spatial technology, topography-sensing technology is comprehensive, macroscopic, and intuitive. It shows unique advantages for rock structure interpretation and has important guiding significance for the research of the shear performances of rock–mortar interface under cyclic load in rock mass engineering. In this paper, cyclic shearing tests combined with the shear surface topography-sensing technology are employed to investigate the evolution characteristics of the interface morphology and the strength deterioration of the rock–mortar interface. Primarily, mortar and three types of rocks are used to prepare different rock–mortar interfaces, which are then applied to cyclic shear loading under two constant normal stresses. Subsequently, the shear strength degradation and dilatancy characteristics of rock–mortar interfaces with varying shear times are discussed. In addition, on the basis of the non-contact three-dimensional topography-sensing technology, the apparent three-dimensional point–cloud coordinate information of rock–mortar interface before and after each shear loading is obtained, and the apparent three-dimensional topography parameters of rock–mortar interface are calculated, according to which the influences of normal stress and lithology on the topography of interface subjected to cyclic shearing loading are analyzed. |
