ESTIMATION OF OPTIMAL PARAMETER FOR RANGE NORMALIZATION OF MULTISPECTRAL AIRBORNE LIDAR INTENSITY DATA
| Autor: | Man Ho Kwan, Wai Yeung Yan |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
lcsh:Applied optics. Photonics
Normalization (statistics) 010504 meteorology & atmospheric sciences lcsh:T Coefficient of variation Attenuation Multispectral image 0211 other engineering and technologies lcsh:TA1501-1820 02 engineering and technology Land cover 15. Life on land lcsh:Technology 01 natural sciences Cross-validation Lidar Data point lcsh:TA1-2040 Environmental science lcsh:Engineering (General). Civil engineering (General) 021101 geological & geomatics engineering 0105 earth and related environmental sciences Remote sensing |
| Zdroj: | ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol V-3-2020, Pp 221-226 (2020) |
| ISSN: | 2194-9050 |
| Popis: | Range normalization is a common data pre-process that aims to improve the radiometric quality of airborne LiDAR data. This radiometric treatment considers the rate of energy attenuation sustained by the laser pulse as it travels through a medium back and forth from the LiDAR system to the surveyed object. As a result, the range normalized intensity is proportional to the range to the power of a factor a. Existing literature recommended different a values on different land cover types, which are commonly adopted in forestry studies. Nevertheless, there is a lack of study evaluating the range normalization on multispectral airborne LiDAR intensity data. In this paper, we propose an overlap-driven approach that is able to estimate the optimal a value by pairing up the closest data points of two overlapping LiDAR data strips, and subsequently estimating the range normalization parameter a based on a least-squares adjustment. We implemented the proposed method on a set of multispectral airborne LiDAR data collected by a Optech Titan, and assessed the coefficient of variation of four land cover types before and after applying the proposed range normalization. The results showed that the proposed method was able to estimate the optimal a value, yielding the lowest cv, as verified by a cross validation approach. Nevertheless, the estimated a value is never identical for the four land cover classes and the three laser wavelengths. Therefore, it is not recommended to label a specific a value for the range normalization of airborne LiDAR intensity data within a specific land cover type. Instead, the range normalization parameter is deemed to be data-driven and should be estimated for each LiDAR dataset and study area. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|