Quantitative planar laser-induced fluorescence imaging of multi-component fuel/air mixing in a firing gasoline-direct-injection engine: Effects of residual exhaust gas on quantitative PLIF
Autor: | R. Stevens, Huiyu Fu, Ben Williams, Stan Wallace, Paul Ewart, H. L. Walmsley, Richard Stone, Roger Cracknell, David Richardson, Xiaowei Wang, Hongrui Ma |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2010 |
Předmět: |
Chemistry
General Chemical Engineering Analytical chemistry General Physics and Astronomy Energy Engineering and Power Technology Exhaust gas General Chemistry Combustion Fuel injection Fuel Technology Planar laser-induced fluorescence Gas engine Air–fuel ratio Gasoline direct injection Petrol engine |
Zdroj: | COMBUSTION AND FLAME. 157(10) |
ISSN: | 0010-2180 |
Popis: | A study of in-cylinder fuel-air mixing distributions in a firing gasoline-direct-injection engine is reported using planar laser-induced fluorescence (PLIF) imaging. A multi-component fuel synthesised from three pairs of components chosen to simulate light, medium and heavy fractions was seeded with one of three tracers, each chosen to co-evaporate with and thus follow one of the fractions, in order to account for differential volatility of such components in typical gasoline fuels. In order to make quantitative measurements of fuel-air ratio from PLIF images, initial calibration was by recording PLIF images of homogeneous fuel-air mixtures under similar conditions of in-cylinder temperature and pressure using a re-circulation loop and a motored engine. This calibration method was found to be affected by two significant factors. Firstly, calibration was affected by variation of signal collection efficiency arising from build-up of absorbing deposits on the windows during firing cycles, which are not present under motored conditions. Secondly, the effects of residual exhaust gas present in the firing engine were not accounted for using a calibration loop with a motored engine.In order to account for these factors a novel method of PLIF calibration is presented whereby 'bookend' calibration measurements for each tracer separately are performed under firing conditions, utilising injection into a large upstream heated plenum to promote the formation of homogeneous in-cylinder mixtures. These calibration datasets contain sufficient information to not only characterise the quantum efficiency of each tracer during a typical engine cycle, but also monitor imaging efficiency, and, importantly, account for the impact of exhaust gas residuals (EGR). By use of this method EGR is identified as a significant factor in quantitative PLIF for fuel mixing diagnostics in firing engines.The effects of cyclic variation in fuel concentration on burn rate are analysed for different fuel injection strategies. Finally, mixture distributions for late injection obtained using quantitative PLIF are compared to predictions of computational fluid dynamics calculations. © 2010 The Combustion Institute. |
Databáze: | OpenAIRE |
Externí odkaz: |