| Autor: |
Chinh Pham Van, Tuan Le Quang, Hieu Nguyen Tuan, Tien Vu Dinh |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Vietnam Journal of Catalysis and Adsorption. 9 |
| ISSN: |
0866-7411 |
| DOI: |
10.51316/jca.2020.13 |
| Popis: |
Nitrogen generator working by pressure swing adsorption cycle using carbon molecular sieves adsorbent is widely used in industry at small and medium scale in recent years, due to its convenience. This is equipment that uses a molecular size selective adsorption technique to separate nitrogen from air. In general, kinetic modeling and optimization are commonly used to analyze the process dynamics of the adsorption column at various operating conditions in which process parameters such as gas concentration, operating temperature and pressure are considered to be functions of time and bed height. In this paper, a mathematical model describing the adsorption column according to the pressure function is established following time and the height of the bed assuming that the velocity through area of the bed is constant at each pressure. The results of these calculations are model parameters that describe the adsorption process of the column. This model can be solved by MATLAB software to simulate the adsorption process of the column. This study was carried out on a nitrogen gas generator that was researched and designed at the Institute of Technology - General Department of Defense Industry to simulate, optimize and scale-up. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
