Experimental analysis on circular concrete-filled steel tubular beam-columns under unequal load eccentricities
| Autor: | ALBERO GABARDA, VICENTE, Ibáñez, Carmen, Hernández-Figueirido, D., Piquer, A. |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: |
INGENIERIA DE LA CONSTRUCCION
equivalent moment factor concrete-filled steel tubular columns Steel-concrete composite beam-columns unequal load eccentricity experimental testing Experimental testing Concrete-filled steel tubular columns Unequal load eccentricity Equivalent moment factor Civil and Structural Engineering steel–concrete composite beam-columns |
| Zdroj: | Repositori Universitat Jaume I Universitat Jaume I |
| Popis: | [EN] This paper presents eight experimental tests on circular concrete-filled steel tubular (CFST) beam-columns loaded under unequal eccentricities at both ends. This loading scheme has not been widely studied yet in previous research works on CFST columns, but it may be very common into industrial or residential multi-storey frames, where both ends are subjected to different bending moments. Tests results revealed that the ultimate resisting load increases when the column is loaded under unequal eccentricities compared to what is loaded under equal eccentricities. However, under certain conditions, the column ductility decreases. Also, the equations provided by the Eurocode 4 and AISC 360-16 for second order effects were assessed. Specifically, the equivalent moment factors, beta or C-m, were calculated from experimental data and compared to those given by the standards. Although Eurocode 4 presents more accurate predictions, both codes provide safe predictions for higher slenderness beam columns but unsafe predictions for double curvature members with low slenderness. In view of the results, further research is needed to improve the equivalent moment factor proposals including additional parameters apart from the loading eccentricity ratio. The authors would like to express their sincere gratitude to Uni-versitat Jaume I for the funding provided through the project UJI-B2018-58. Funding for open access charge: CRUE-Universitat Jaume I. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|