| Autor: |
Emre Diker, Hakan Terzioglu, Diogo N. M. Gouveia, Mustafa Borga Donmez, Jeremy Seidt, Burak Yilmaz |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Diker, Emre; Terzioglu, Hakan; Gouveia, Diogo N M; Donmez, Mustafa Borga; Seidt, Jeremy; Yilmaz, Burak (2023). Effect of material type, torque value, and sterilization on linear displacements of a scan body: An in vitro study. Clinical implant dentistry and related research, 25(2), pp. 419-425. Wiley 10.1111/cid.13187 |
| DOI: |
10.48350/178623 |
| Popis: |
BACKGROUND There is limited knowledge on the effect of scan body (SB) material type, torque value, and sterilization on linear displacements of implant SBs. PURPOSE To evaluate the effect of material type, torque value, and sterilization on linear displacements of SBs during screw tightening by using digital image correlation (DIC) analysis. MATERIALS AND METHODS One polyetheretherketone (PEEK, Zfx Intraoral Scan Body) and one titanium SB (Ti, MPS Zimmer Scanbody R1410) were tightened with 5 Ncm torque on two implants (Zimmer TSV ⌀4.7 mm) by using a digital torque limiting device. SBs' initial spatial positions relative to the implants were recorded by using 3D DIC technique. Measurements were repeated after initially increasing torque value to 10 Ncm and then to 15 Ncm, and these steps were repeated for a total of 10 PEEK and 10 Ti SBs on both implants (n = 20). All SBs were then sterilized 25 times by using an autoclave (STATIM 5000 S G4) according to manufacturer's recommendations and all measurements were repeated. Linear displacements on three axes were calculated for each SB with increasing torque values (from 5 to 10 Ncm and from 10 to 15 Ncm) before and after sterilization. SB displacements within each torque value-sterilization pair were compared by using Mann-Whitney U test, whereas Wilcoxon signed-rank test was used to compare SB displacements within each material-torque value pair between conditions and within each material-sterilization pair between torque values (α = 0.05). RESULTS On x-axis, PEEK SBs had higher displacements than Ti SBs (p |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
