Influence of SiO2/Al2O3 Molar Ratio on Phase Composition and Surfaces Quality of Aluminum Silicate Sanitary Glazes in the SiO2-Al2O3-CaO-Na2O System
| Autor: | Janusz Partyka, Maciej Sitarz, Magdalena Leśniak |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
lcsh:TN1-997
Materials science microstructure Aluminum silicate Mineralogy 02 engineering and technology Surface finish 03 medical and health sciences 0302 clinical medicine Quality (physics) Molar ratio lcsh:TA401-492 surface 030212 general & internal medicine lcsh:Mining engineering. Metallurgy roughness Metallurgy Metals and Alloys Sio2 al2o3 Glazes 021001 nanoscience & nanotechnology Microstructure Phase composition SiO2/Al2O3 molar ratio lcsh:Materials of engineering and construction. Mechanics of materials 0210 nano-technology |
| Zdroj: | Archives of Metallurgy and Materials, Vol 61, Iss 4, Pp 1739-1746 (2016) |
| ISSN: | 2300-1909 |
| DOI: | 10.1515/amm-2016-0279 |
| Popis: | This paper presents the results of research on aluminum silicate sanitary glazes in the SiO2-Al2O3-CaO-Na2O system with different SiO2/Al2O3 molar ratio. XRD, SEM-EDS and FITR measurement indicated that SiO2/Al2O3 molar ratio has a significant impact on the phase composition of the obtained glazes. Glass-ceramic glazes were obtained that consisted of both the glass phase and pseudowollastonite (Ca3[SiO3]3) or anorthite (Ca[Al2Si2O8]) crystals. Subsequently, the influence of phase composition on surface quality (roughness) was examined for the obtained samples. On the basis of the conducted examination of glaze surface roughness was observed that glazes of extreme SiO2/Al2O3 molar ratio are characterized with greatest surface roughness when compared to other glazes. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|