Modelling of battery energy storage systems under faulted conditions: Assessment of protection systems behaviour
Autor: | Marco Maccioni, M. Rebolini, Asia Codino, Stefano Lauria, Fabio Massimo Gatta, Alberto Geri, F. Palone, G. Gemelli |
---|---|
Rok vydání: | 2016 |
Předmět: |
protective relays
Engineering electrical and electronic engineering fault analysis Residual-current device business.industry Ground 020209 energy Protective relay Electrical engineering inverter transient behaviour 02 engineering and technology Fault (power engineering) renewable energy Fault indicator Reliability engineering Overcurrent 0202 electrical engineering electronic engineering information engineering energy engineering and power technology storage system sustainability and the environment Digital protective relay business Power-system protection |
Zdroj: | 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC). |
DOI: | 10.1109/eeeic.2016.7555651 |
Popis: | The paper present a preliminary study of the protective relays of a 10 MW sized battery energy storage system (BESS) recently installed by TERNA, the Italian TSO. A complete model of the system, including inverters, has been implemented in ATP-EMTP in order to assess the behaviour of protective relays during symmetric and asymmetric faults. Results show that ground fault protection of MV feeders can be performed by zero-sequence non-directional overcurrent relays, obtaining a correct fault selection even for fault resistances in the kΩ range. Phase-to-phase and three-phase fault selection can be performed by means of overcurrent relays: an inverter current limiting control under fault conditions has to be implemented to avoid the system shutdown. Lastly, HV-level faults have been simulated during BESS-supplied, islanded operation, evidencing very low fault current contributions, depending on the actual share of battery modules operating at the time of fault, with less modules giving worst results. |
Databáze: | OpenAIRE |
Externí odkaz: |