Influence of topography on the running-in of water-lubricated silicon carbide journal bearings
| Autor: | Peter Andersson, Jari Juhanko, Pekka Lintula, Antti-Pekka Nikkilä |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 1996 |
| Předmět: |
Bearing (mechanical)
Materials science Silicon chemistry.chemical_element Polishing Surfaces and Interfaces Condensed Matter Physics Surfaces Coatings and Films law.invention Carbide chemistry.chemical_compound chemistry Mechanics of Materials law Materials Chemistry Forensic engineering Lubrication Silicon carbide Surface roughness Composite material Material properties |
| Zdroj: | Andersson, P, Juhanko, J, Nikkilä, A-P & Lintula, P 1996, ' Influence of topography on the running-in of water-lubricated silicon carbide journal bearings ', Wear, vol. 201, no. 1-2, pp. 1-9 . https://doi.org/10.1016/S0043-1648(95)06815-5 |
| ISSN: | 1873-2577 0043-1648 |
| Popis: | The study summarizes an experimental investigation on the running-in of water-lubricated journal bearings and shaft sleeves made of 10 different commercial silicon carbide materials. In each test the sliding surfaces became polished and the sliding conditions were transformed from boundary or mixed lubrication to full film lubrication within a rather short sliding distance. The initial surface roughness strongly influenced on the initial dynamic coefficient of friction, and on the running-in distance required to reduce the coefficient of friction from a level typical of boundary or mixed lubrication to a level typical of full film lubrication. The initial surface roughness of the shaft sleeve was more slowly removed than that of the bearing, and therefore the surface quality of the shaft rather than that of the bearing governed the running-in distance required for the polishing. The initial surface roughness of the bearing practically only influenced the dynamic coefficient of friction at the beginning of the running-in procedure. In comparison with the influence of the surface roughness variations, the material properties of the silicon carbides studied has a limited influence on the running-in behaviour,which was principally related to a tribochemical surface polishing process. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect