Design of a milling reactor coupled to a high-temperature mass spectrometer for thermodynamic/kinetic data of hydrogen-based materials
| Autor: | Christian Chatillon, A. El Kharbachi, L. Artaud, H. Collas, Ioana Nuta |
|---|---|
| Přispěvatelé: | Helmholtz-Institute Ulm, Université Grenoble Alpes (UGA), Science et Ingénierie des Matériaux et Procédés (SIMaP), Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Université Grenoble Alpes (UGA)-Institut polytechnique de Grenoble - Grenoble Institute of Technology (Grenoble INP ) |
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: |
Materials science
Hydrogen Capillary action Energy Engineering and Power Technology chemistry.chemical_element Flow calculations 02 engineering and technology 010402 general chemistry Mass spectrometry 01 natural sciences Physics::Fluid Dynamics [CHIM.ANAL]Chemical Sciences/Analytical chemistry Phase (matter) Coupling (piping) [CHIM]Chemical Sciences mass spectrometry Capillary Tubing metal hydrides vapor pressure Renewable Energy Sustainability and the Environment Hydride Mechanics [CHIM.MATE]Chemical Sciences/Material chemistry 021001 nanoscience & nanotechnology Condensed Matter Physics 0104 chemical sciences Fuel Technology chemistry experimental device 0210 nano-technology Molecular beam |
| Zdroj: | International Journal of Hydrogen Energy International Journal of Hydrogen Energy, Elsevier, 2021, 46 (5), pp.3464-3474. ⟨10.1016/j.ijhydene.2020.10.241⟩ |
| ISSN: | 0360-3199 |
| DOI: | 10.1016/j.ijhydene.2020.10.241⟩ |
| Popis: | International audience; Identification of species in the gaseous phase of hydride materials and their mixtures (e.g. LiBH4–MgH2) is crucial for understanding the reactional mechanisms and diffusion kinetics of hydrogen across the different interfaces of phase segregation. This phase separation makes the characterization by conventional gas analysis techniques complicated and some analytical information could not be accessible. To overcome this surface/interface related issue, the study of the evolution of the gas phase emitted by the complex hydrides during ball-milling is considered. In this respect, an experimental set-up is designed by coupling a milling reactor with a mass spectrometer through a capillary tubing and an effusion Knudsen cell. A gas flow study (from molecular to viscous regimes) is performed in order to propose a suitable architecture of the entire device (ball-mill, capillary tubing, pipes, effusion cell compartment and pumping system) compatible with the mass spectrometric detection in terms of effused flow and molecular beam. Simulation of the flows and definition of their regimes nature at each stage of the pipes and vessels system is addressed as function of geometric parameters, upstream pressures, and pumping capacity on the downstream side (effusion cell). The study highlights the advantage of using a capillary tubing for the connection and ensure an optimal detection. Different working pressure conditions are demonstrated and associated to its length, meanwhile the diameter of the capillary has been demonstrated to be too sensitive to be varied. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect