An investigation into the behavioural characteristics of orthodontic elastomeric modules
| Autor: | L Lagerstrom, J A Sandham, P A Dowling, W B Jones |
|---|---|
| Rok vydání: | 1998 |
| Předmět: |
Dental Stress Analysis
Materials science Friction Orthodontic Brackets Surface Properties Experimental laboratory Mechanics Elastomer computer.software_genre Weight-Bearing Stress (mechanics) Load testing Orthodontic Appliances Materials Testing Humans Load force Analysis of Variance Mouth Universal testing machine business.industry Bracket Humidity General Medicine Structural engineering Microscopy Electron Scanning Equipment Failure Frictional resistance Rubber Stress Mechanical business computer |
| Zdroj: | British Journal of Orthodontics. 25:197-202 |
| ISSN: | 0301-228X |
| DOI: | 10.1093/ortho/25.3.197 |
| Popis: | The object of the study was to investigate the behavioural characteristics of orthodontic elastomeric modules with regard to their effect on frictional resistance and their failure load forces, and involved the use of an experimental laboratory-based study. Six cohorts were assembled employing five types of module and two bracket types. Straight lengths of 0.018 x 0.025-inch stainless steel were pulled through the ligated brackets and frictional resistance was measured using an Instron universal testing machine. Recordings were repeated over a 4-week period, during which time the cohorts were placed in a simulated oral environment. Failure load forces of new and used modules were also recorded, and frictional resistance and failure load forces. Analysis of variance revealed that the Minitwin cohort exhibited significantly higher frictional resistance and that the clear modules demonstrated the lowest levels of friction. Time soaked in a simulated oral environment had a variable effect on frictional resistance. A wide range of failure load forces was seen for the five types of module and all types showed a reduction in failure load force following their soaking in the simulated oral environment. There was variation in performance of the different modules both in friction testing and failure load testing. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|