| Popis: |
Yttria-doped zirconia ceramics have many applications in a wide range of industries mainly due to their excellent mechanical properties, corrosion resistance and biocompatibility. In this study, micromechanical properties of yttria-doped zirconia produced by Direct-Ink Writing (DIW) were investigated and compared to the ones produced by Cold Isostatic Pressing (CIP). In doing so, mechanical response was assessed at different length scales, from macro- up to submicrometric-, by means of Vickers hardness, nanoindentation, and nanoscratch tests. Microstructure was also characterized by determining grain size, crystal structure and phase tetragonal to monoclinic phase transformation. Results revealed that printed samples displayed 20–25% lower hardness values compared to those exhibited by the respective CIP pairs. Differences in hardness between 3 and 8 mol% yttria content evaluated for CIP samples were slight for printed samples, due to the effect of microstructural defects like porosity, resulting from the processing parameters used. At the local level, such an effect was found to be lower. In this sense, hardness and elastic modulus achieved by nanoindentation were closer, when comparing printed and CIP samples. Scratch tests carried out from 0 to 250 mN revealed that 3 mol% Y2O3 samples developed micro-fracture events in the track length, being the printed samples the ones heavily deformed. |
