Mechanical Properties of Filament Wound Pipes: Effects of Winding Angles
| Autor: | Vineta Srebrenkoska, Sara Srebrenkoska, Maja Stefanovska, Simona Naseva, Svetlana Risteska |
|---|---|
| Rok vydání: | 2015 |
| Předmět: | |
| Zdroj: | Quality of Life (Banja Luka) - APEIRON. 11 |
| ISSN: | 1986-6038 1986-602X |
| Popis: | The aim of this study is to investigate the mechanical properties of continuous glass fiber reinforced composite tubes produced by filament winding technique with three different winding angles. With help of split-disk tests hoop tensile properties of selected specimens were determined, where reliable results were obtained with low standard deviations. It was observed that bigger winding angle lead to higher hoop tensile properties of filament wound tubular samples. Also, the effect of reinforcement direction on the mechanical performances of these composites has been presented. Fiber fracture and fiber-matrix debonding is observed to be the dominant failure mechanisms by samples winded with bigger winding angles, whereas delamination in addition to these mechanisms is detected by samples with smaller winding angles. From received results it is concluded that, mechanical properties of composite specimens are depended from winding angles in filament winding technology.With help of conducted SEM analysis good merger between glass fibers and the epoxy matrix was seen, but cracks within plies and broken fiber were noticed, due to the high fiber branching. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|