High-pressure melt curve of shock-compressed tin measured using pyrometry and reflectance techniques
| Autor: | Robert Hixson, Paul D. Asimow, O. V. Fat'yanov, L. R. Veeser, B. M. La Lone, William Turley, G. D. Stevens |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2019 |
| Předmět: |
010302 applied physics
Phase boundary Materials science General Physics and Astronomy Lithium fluoride Thermodynamics chemistry.chemical_element 02 engineering and technology Velocimetry 021001 nanoscience & nanotechnology 01 natural sciences Reflectivity law.invention chemistry.chemical_compound chemistry law 0103 physical sciences Radiance 0210 nano-technology Tin Phase diagram Pyrometer |
| Popis: | We have developed a new technique to measure the melt curve of a shocked metal sample and have used it to measure the high-pressure solid-liquid phase boundary of tin from 10 to 30 GPa and 1000 to 1800 K. Tin was shock compressed by plate impact using a single-stage powder gun, and we made accurate, time-resolved radiance, reflectance, and velocimetry measurements at the interface of the tin sample and a lithium fluoride window. From these measurements, we determined temperature and pressure at the interface vs time. We then converted these data to temperature vs pressure curves and plotted them on the tin phase diagram. The tin sample was initially shocked into the high-pressure solid γ phase, and a subsequent release wave originating from the back of the impactor lowered the pressure at the interface along a constant entropy path (release isentrope). When the release isentrope reaches the solid-liquid phase boundary, melt begins and the isentrope follows the phase boundary to low pressure. The onset of melt is identified by a significant change in the slope of the temperature-pressure release isentrope. Following the onset of melt, we obtain a continuous and highly accurate melt curve measurement. The technique allows a measurement along the melt curve with a single radiance and reflectance experiment. The measured temperature data are compared to the published equation of state calculations. Our data agree well with some but not all of the published melt curve calculations, demonstrating that this technique has sufficient accuracy to assess the validity of a given equation of state model. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|