Standard Hot Pressing as a Possible Solution to Obtain Dense K0.5Na0.5NbO3 Ceramic Doped by Er2O3 and Yb2O3
| Autor: | Dariusz Kata, Paweł Rutkowski, Adrian Graboś, Dariusz Grzybek, Jan Huebner, Bogdan Sapiński |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2019 |
| Předmět: |
Materials science
porosity Scanning electron microscope Analytical chemistry Hot pressing sensors piezoelectric properties Tetragonal crystal system hot pressing visual_art visual_art.visual_art_medium Relative density General Materials Science Orthorhombic crystal system Ceramic Powder mixture Monoclinic crystal system |
| Zdroj: | Materials Volume 12 Issue 24 |
| ISSN: | 1996-1944 |
| DOI: | 10.3390/ma12244171 |
| Popis: | In this study, the influence of the addition of rare earth oxides on the phase composition and density of KNN piezoelectric ceramics was investigated. The initial powders of Na2CO3 and K2CO3 were dried at 150 ° C for 2 h. Then, a powder mixture for synthesis was prepared by adding a stoichiometric amount of Nb2O5 and 5 and 10 wt % overabundance of Na2CO3. All powders were mixed by ball-milling for 24 h and synthesized at 950 ° C. The phase composition of the reaction bed was checked by means of X-ray diffraction (XRD). It had an appearance of tetragonal and monoclinic K0.5Na0.5NbO3 (KNN) phases. Then, 1 and 2 wt % of Er2O3 and Yb2O3, were added to the mixture. Green samples of 25 mm diameter and 3 mm thickness were prepared and sintered by hot pressing at 1000 ° C for 2 h under 25 MPa pressure. The final samples were investigated via scanning electron microscopy (SEM)-energy-dispersive X-ray spectroscopy (EDS), XRD, Rietveld, and ultrasonic methods. Phase analysis showed tetragonal and orthorhombic KNN phases, and a contamination of (K2CO3· 1.5H2O) was present. The obtained KNN polycrystals had a relative density above 95%. Texturing of the material was confirmed as a result of hot pressing. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|