Dynamic characteristics of passive and semi-active cabin mounts for vibration control of a wheel loader
Autor: | In Dong Kim, Soon Yong Yang, Chulhee Han, Chul Soo Shin, Sung Jae Kim, Seung-Bok Choi, Jin Yeong Jung |
---|---|
Rok vydání: | 2019 |
Předmět: | |
Zdroj: | International Journal of Heavy Vehicle Systems. 26:239 |
ISSN: | 1741-5152 1744-232X |
DOI: | 10.1504/ijhvs.2019.098278 |
Popis: | In this study, the dynamic characteristics of passive mounts and a semi-active magneto-rheological (MR) mount for vibration attenuation of a wheel loader cabin are experimentally evaluated. First, the design procedures of two different passive mounts are described, and the principal design parameters such as stiffness are determined from a simple but practically feasible dynamic model. Then, passive mounts with different material characteristics are manufactured and experimentally tested. Secondly, a semi-active MR mount is designed based on the field-dependent yield stress of MR fluid. A prototype of the MR mount is then manufactured considering two flow paths: annular path and radial path. Subsequently, the dynamic characteristics of the three mounts such as the frequency-dependent stiffness and damping are evaluated, and their salient properties are discussed. In addition, it is shown from the transmissibility investigation that the semi-active MR mount can effectively isolate unwanted vibrations in a wider operating frequency range compared with the passive rubber mounts. |
Databáze: | OpenAIRE |
Externí odkaz: |