Finite-thickness cohesive elements for modeling thick adhesives
Autor: | Frank A. Leone, Albert Turon, C. Sarrado |
---|---|
Přispěvatelé: | Ministerio de Economía y Competitividad (Espanya) |
Rok vydání: | 2016 |
Předmět: |
Engineering
business.industry Mechanical Engineering Mechanical engineering 02 engineering and technology 021001 nanoscience & nanotechnology Government (linguistics) Mecànica de fractura 020303 mechanical engineering & transports 0203 mechanical engineering Mechanics of Materials Adhesius Adhesives Fracture mechanics General Materials Science Adhesive 0210 nano-technology business Finite thickness |
Zdroj: | © Engineering Fracture Mechanics, 2016, vol. 168, núm. part B, p.105-113 Articles publicats (D-EMCI) DUGiDocs – Universitat de Girona instname |
Popis: | A new cohesive element formulation is proposed for modeling the initial elastic response, softening, and failure of finite-thickness adhesives. By decoupling the penalty stiffness of the cohesive zone model formulation and the physical adhesive modulus, the new formulation ensures proper dissipation of fracture energy for opening and shear loading modes and mixed-mode loading conditions with any combination of elastic and fracture material properties. Predictions are made using the new element formulation for double cantilever beam, end-notched flexure, mixed-mode bending and single lap joint specimens with varying adhesive thicknesses. Good correlation between all predictions and experimental results was observed The first author would like to acknowledge the FPU program grant AP2010-0977 from the Spanish Ministerio de Educación, Cultura y Deporte. The authors also acknowledge the support of the Spanish government through the Ministerio de Economía y Competitividad under the contracts DPI2012-34465 and TRA2015-71491-R |
Databáze: | OpenAIRE |
Externí odkaz: |