Modelling and simulation of D-class current-fed parallel resonant inverter for induction heating system

Autor: Arslan, Leyla, Özbay, Harun
Jazyk: angličtina
Rok vydání: 2022
Předmět:
DOI: 10.5281/zenodo.8071163
Popis: In the induction heating process, non-contact heating is carried out. Induction heating systems are used in heating, melting, surface hardening processes and applications such as cooking. Induction heating is based on Michael Faraday's Law of Induction. Compared to conventional heating methods, the induction heating method has advantages such as shorter processing time, uniform distribution of heat on the material, high efficiency and no explosion hazard. In order to realize induction heating, a variable magnetic field and a metal material placed in the magnetic field are needed. Voltage-fed or current-fed resonant inverters are frequently used to realize power conversion in induction heating and because of their low switching losses and zero current or voltage switching possibilities. In this study, D-class current-fed parallel resonant inverter, which is one of the resonant converter types, is used. The operating states of the switching frequency below the resonant frequency, equal to the resonant frequency, and above the resonant frequency have compared. The simulation results were obtained by modeling the designed current source parallel resonance inverter with PSIM software. Thus, it has been observed that the phase difference between the output current and voltage in the parallel resonant inverter depends on the switching frequency. As a result of the operation of the resonant inverter at the resonant frequency, it has been determined that zero voltage switching is provided. Thus, it has been observed that maximum efficiency is achieved by preventing switching losses and the obtained results are presented.
{"references":["D. K. Cheng, \"Zamanla Değişen Alanlar ve Maxwell Denklemleri,\" in Mühendislik Elektromanyetiğinin Temelleri, A. Köksal and B. Saka, Eds. Ankara: Palme Yayıncılık, 2015, p. 234.","İ. Kara, \"PLC – PDM Kontrollü İndüksiyon Isıtma Sistemi,\" Karabük Üniversitesi,Karabük,Türkiye, 2018.","A. Polsripim, S. Chudjuarjeen, A. Sangswang, P. N. N. Ayudhya, and C. Koompai, \"A Soft Switching Class D Current Source Inverter for Induction Heating with Ferromagnetic Load,\" 2009 Int. Conf. Power Electron. Drive Syst., pp. 877– 881, 2009.","A. Suresh and S. R. Reddy, \"Simulation of Closed Loop Controlled Current Source Inverter fed Ferromagnetic Load,\" pp. 161–164, 2010.","J. Jittakort, A. Sangswang, S. Naetiladdanon, C. Koompai, and S. Chudjuarjeen, \"A soft switching class D current source inverter for induction heating with non-ferromagnetic load,\" 2011.","C. Ekkaravarodome, P. Thounthong, and K. Jirasereeamornkul, \"Implementation of zero-ripple line current induction cooker using class-d current-source resonant inverter with parallel-load network parameters under large-signal excitation,\" J. Electr. Eng. Technol., vol. 13, no. 3, pp. 1251–1264, 2018, doi: 10.5370/JEET.2018.13.3.1251.","A. T. Yapıcı and N. Abut, \"İndüksiyonla Isıtma Uygulamaları için Bir Seri Rezonans İnverter Topolojisi ve Simülasyonu,\" Kocaeli Üniversitesi Fen Bilim. Derg., vol. 1, no. 1, pp. 20–24, 2018.","S. Oncu and H. Ozbay, \"Simulink model of parallel resonant inverter with DSP based PLL controller,\" Elektron. ir Elektrotechnika, vol. 21, no. 6, pp. 14–17, 2015, doi: 10.5755/j01.eee.21.6.13751.","A. Chakraborty, P. K. Sadhu, K. Bhaumik, P. Pal, and N. Pal, \"Behaviour of a high frequency parallel quasi resonant inverter fitted induction heater with different switching frequencies,\" Int. J. Electr. Comput. Eng., vol. 6, no. 2, pp. 447– 457, 2016, doi: 10.11591/ijece.v6i1.8034.","S. I. Annie, K. M. Salim, Z. Tasneem, and M. R. Uddin, \"Frequency analysis of a ZVS parallel quasi resonant inverter for a solar based induction heating system,\" ECCE 2017 - Int. Conf. Electr. Comput. Commun. Eng., pp. 317–320, 2017, doi: 10.1109/ECACE.2017.7912924.","S. S. Choi, C. W. Lee, I. D. Kim, J. H. Jung, and D. H. Seo, \"New Induction Heating Power Supply for Forging Applications Using IGBT Current-Source PWM Rectifier and Inverter,\" ICEMS 2018 - 2018 21st Int. Conf. Electr. Mach. Syst., pp. 709–713, 2018, doi: 10.23919/ICEMS.2018.8549080.","M. S. Goh, S. S. Choi, and I. D. Kim, \"High Power Factor Induction Heating Power Supply for Forging Applications Using 3-Phase 3-Switch PWM Current Source Rectifier,\" Trans. Korean Inst. Electr. Eng., vol. 70, no. 4, pp. 457–466, 2021, doi: 10.5370/KIEE.2021.70.3.457.","G. Yalçın, \"Üç Fazlı Gerilim Kaynaklı Tamköprü Paralel Rezonans İnvertörlü İndüksiyon Isıtma Sistemi,\" Marmara Üniversitesi,İstanbul,Türkiye, 2014.","S. Çetin, \"Bir fazlı bir indüksiyon ısıtma sistemi analizi ve dizaynı,\" Pamukkale Üniversitesi,Pamukkale,Türkiye, 2005.","S. Öncü, \"Bir Fazlı Yüksek Verimli Ev Tipi Bir İndüksiyon Isıtma Sistemi,\" Pamukkale Üniversitesi,Pamukkale,Türkiye, 2005.","H. E. Özden, \"Yüksek Frekanslı İndüksiyon Isıtma Sistemi Tasarımı ve Uygulaması,\" Karabük Üniversitesi,Karabük,Türkiye, 2020."]}
Databáze: OpenAIRE
Externí odkaz: