Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results
| Autor: | Éozénou, Fabien, Baudrier, Matthieu, Cenni, Enrico, Chouhan, Vijay, Fayette, Elise, Hayano, Hitoshi, Ida, Yoshiaki, Ito, Hayato, Jullien, Grégoire, Kato, Shigeki, Kubo, Takayuki, Maurice, Luc, Monjushiro, Hideaki, Nii, Keisuke, Saeki, Takayuki, Servouin, Christophe, Yamaguchi, Takanori |
|---|---|
| Přispěvatelé: | Institut de Recherches sur les lois Fondamentales de l'Univers (IRFU), Commissariat à l'énergie atomique et aux énergies alternatives (CEA)-Université Paris-Saclay |
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | JACoW 20th International Conference on RF Superconductivity 20th International Conference on RF Superconductivity, Jun 2021, Online Conference, United States. pp.TUPCAV001, ⟨10.18429/JACoW-SRF2021-TUPCAV001⟩ |
| DOI: | 10.18429/jacow-srf2021-tupcav001 |
| Popis: | Vertical Electro-Polishing (VEP) of elliptical cavities using rotating Ninja cathodes (Marui Company patented technology) has continually been improved since 2012 and successfully applied for 1300MHz multicell ILC-type resonators. The goal of the presented study is to apply this technology to 704 MHz ESS-type resonators with both better Q₀ and accelerating gradients in mind. We intend to demonstrate the superiority of VEP compared to standard Buffer Chemical Polishing (BCP), for possible applications such as MYRRHA accelerator. We describe here the promising results achieved on β=0.86 single-cell cavity after 200 µm uniform removal. The cavity quenched at 27 MV/m without any heat treatment. The surface resistance achieved was less than 5nΩ at 1.8K. Substantial performance improvement is expected after heat treatment of the cavity and additional 20 µm VEP sequence. A cathode for 5-Cell ESS cavity is concomitantly under design stage. Proceedings of the 20th International Conference on RF Superconductivity, SRF2021, East Lansing, MI, USA |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|