Microstructure and mechanical properties of Al2O3-Cu-Ni hybrid composites fabricated by slip casting
| Autor: | Aleksandra Miazga, Marcin Wachowski, Paulina Piotrkiewicz, Paweł Falkowski, Waldemar Kaszuwara, Justyna Zygmuntowicz |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
ni
Materials science slip casting microstructure Composite number 02 engineering and technology mechanical properties 01 natural sciences Slip (ceramics) lcsh:TP785-869 Fracture toughness Flexural strength al2o3 0103 physical sciences Ceramic Composite material cu composites 010302 applied physics 021001 nanoscience & nanotechnology Microstructure Casting lcsh:Clay industries. Ceramics. Glass visual_art Vickers hardness test Ceramics and Composites visual_art.visual_art_medium 0210 nano-technology |
| Zdroj: | Processing and Application of Ceramics, Vol 14, Iss 1, Pp 1-8 (2020) |
| ISSN: | 2406-1034 1820-6131 |
| Popis: | This work focuses on developing the fabrication method of hybrid composites based on Al2O3-Cu system with the addition of nickel phase. The composites were prepared by slip casting and the slurries with a high concentration of solid content were used. The sintered composites were characterized by XRD, SEM and EDX. Selected physical proprieties, namely hardness, fracture toughness and bending strength were also determined. The microstructure and its influence on the mechanical properties were investigated. XRD analyses revealed that the obtained composites contained Al2O3, Ni, Cu and solid solution CuNi phases. The use of slip casting method allowed the production of the composites characterized by relative density of _96%. An increase in metallic phase concentration caused a decrease in Vickers hardness and increased the fracture toughness of the Al2O3-Cu-Ni materials compared to the Al2O3 samples. The results with high cognitive value and application potential were obtained. This research enabled the foundations of an innovative method of forming hybrid composite structures, which combined the best features of ceramics (hardness, resistance to high temperature) with metal properties (crack resistance, good electrical conductivity). This type of composite can be used for temperature, conductivity and flow sensors. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|