Finite element analysis of Carbon composite sandwich material with agglomerated Cork core
| Autor: | M. Milwich, B.L. Deopura, H. Plank, Sumit Kumar |
|---|---|
| Rok vydání: | 2011 |
| Předmět: |
Materials science
business.industry ultra-light weight flexural behaviour Linear elasticity finite element analysis General Medicine Structural engineering Bending agglomerated cork Finite element method Core (optical fiber) Flexural strength foam cores Ultimate tensile strength Composite material business Sandwich-structured composite composite sandwich Engineering(all) Beam (structure) |
| Zdroj: | Procedia Engineering. 10:478-483 |
| ISSN: | 1877-7058 |
| Popis: | Composite sandwich structures were developed for the hydrofoil sail boat hull using biaxial carbon fabric/epoxy composite facing and agglomerated cork core. These ultra-light weight structures were tested through four point bending tests to characterize their flexural behavior. The material exhibited an initial linear elastic behavior followed by non-linear elastic-plastic behavior. Finite element analysis of the sandwich beams was performed to analyze the flexural behavior of the structure. It was found that the transition from linear elastic to non-linear elastic-plastic behavior is the result of compressive yielding of core material which leads to indentation in the beam. This also causes initiation of failure in the core. A shift in the centroid axis of the beam towards the tensile face was also observed. The sandwich structures made of cross-linked PVC and PMI foam cores were also analyzed for comparison. Further, a parametric study on the effect of areal density and ply angle of the facing fabric and core thickness were performed using finite element method. The parametric study revealed that the transition from linear to non-linear trend is caused by different mechanisms with the change in the mentioned parameters. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|