Optimization of dosing tank emptying using spiral vibration
| Autor: | Katerina Urbanova, Jakub Hlosta, Jan Nečas, Jiri Zegzulka, David Zurovec, Jan Diviš |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2018 |
| Předmět: |
dosing tank
Technology 010407 polymers Materials science Acoustics Manufactures spiral vibration 02 engineering and technology General Medicine Engineering (General). Civil engineering (General) Environmental technology. Sanitary engineering 01 natural sciences TS1-2301 0104 chemical sciences Vibration cohesive sand 020401 chemical engineering TJ1-1570 Mechanical engineering and machinery Dosing TA1-2040 0204 chemical engineering TD1-1066 Spiral |
| Zdroj: | Advances in Science and Technology Research Journal, Vol 12, Iss 3, Pp 143-149 (2018) |
| Popis: | This article addresses the optimization of a dosing tank using a spiral harmonic motion. The dosing tank is used for ashort-term storage of cohesive sand, which is then released into a tubular mold. Originally, a solution based on the principle of wiping the material using rotary blades and brushes was used to fill the molds. However. this method was not effective enough. This solution suffered from uneven dosing as well as a loss of material. The mold filling time ranged around 20 seconds. During the course of optimization of the dosing tank, a new design of the tank was created and external energy in aform of harmonic spiral vibrations was introduced into the system. The chosen shape of the harmonic spiral motion proved to be the most suitable for continuous emptying of the cohesive sand from the dosing tank into the tubular mold in a very short time. There was also a significant elimination of material losses. It was determined that the frequency of harmonic motion affects uniform dispensing of material fromtanks. Web of Science 12 3 149 143 |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|