Ispitivanje mogućnosti sinteze inovativnih sorbenata i nosača katalizatora na bazi keramike kontrolisane otvorene poroznosti
| Autor: | Vesna Nikolic, Jovana Djokic, Zeljko Kamberovic, Aleksandar Marinkovic, Sanja Jevtic, Zoran Andjic |
|---|---|
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Hemijska Industrija Hemijska industrija |
| ISSN: | 2217-7426 0367-598X |
| Popis: | The aim of this study was to investigate a possibility of synthesis of porous ceramics with controlled open porosity, which could be used as sorbents and catalyst supports. Two organic additives were used to obtain open porosity: polystyrene beads and cellulose fibers, which are mixed with kaolin clay powder and the appropriate water content. Samples were sintered at 1050?C for 1 h. Characterization of the obtained products included X-ray powder diffraction analysis (XRPD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and elemental CHNS analysis. In addition, porosity was examined by quantification of visual information. The specific surface areas were determined by the Brunauer?Emmett?Teller (BET) method. Also, density and compressive strength of the obtained samples were assessed. It was determined that by sintering, the organic component completely leaves the system. For samples prepared with polystyrene beads and with cellulose fibers, satisfactory mechanical properties were obtained: compressive strengths were 1.42 and 1.56 MPa, respectively. It was noted that significantly higher open porosity was obtained by using polystyrene beads as a sacrificial template (porosity of ~56 %) instead of cellulose fibers (porosity of ~6 %). |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|