Analysis of Woven Fabric at the Place of the Sewn Seam
| Autor: | Stana Kovačević, Beti Rogina-Car, Ivana Schwarz |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2018 |
| Předmět: |
Sewn seam
mechanical properties loading wool/polyester woven fabric 010407 polymers Materials science Chemical technology 02 engineering and technology TP1-1185 01 natural sciences Durability GeneralLiterature_MISCELLANEOUS 0104 chemical sciences Breaking force 020401 chemical engineering Woven fabric sewn seam General Materials Science 0204 chemical engineering Composite material Material properties Intensity (heat transfer) |
| Zdroj: | Autex Research Journal, Vol 18, Iss 3, Pp 216-220 (2018) |
| ISSN: | 2300-0929 |
| Popis: | Key importance and the role of sewn seam in the woven fabric are presented. Fabric properties in the places joined with the sewn seam on which garment durability, applicability, appearance and quality depend are highlighted. Seam location is usually the weakest spot on the garment, especially when the great loads are present at these places. Mechanical properties of the sewn fabrics were investigated in different test conditions. The influence of the load on the sewn seam is analyzed in time intervals. Sample with seam have approximately 70% lower breaking properties (breaking force and elongation at break) than the sample without seam. By preloading the seam fabrics with 30%, 50% and 70% of elongation at break, for a 3-h period, the effect on mechanical properties were tested and the differences in pre-stretching intensity were observed. By conducting such test, it is expected that the fabric experience further degradation and that breaking properties further reduce, but the exact opposite occurred (breaking properties, by increasing the preload, increase even more), because of various material properties (structural fabric properties, raw material characteristics, seam characteristics). |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|