On Cutting Force Coefficient Model with Respect to Tool Geometry and Tool Wear
| Autor: | Petr Kolar, Tony L. Schmitz, Petr Fojtu |
|---|---|
| Rok vydání: | 2015 |
| Předmět: |
Materials science
Carbon steel Metallurgy cutting force coefficients Mechanical engineering Absolute value Cutting edge geometry Edge (geometry) engineering.material Industrial and Manufacturing Engineering Carbide Machining Artificial Intelligence Cutting force Linear regression engineering coated carbide tool linear regression Tool wear flank wear |
| Zdroj: | Procedia Manufacturing. 1:708-720 |
| ISSN: | 2351-9789 |
| DOI: | 10.1016/j.promfg.2015.09.020 |
| Popis: | Cutting force models are important for machining processes simulations. This paper presents measurement of cutting forces during C45 (1.0503) carbon steel machining using a coated carbide tool. Various cutting edge geometries and cutting conditions as well as various tool flank wear values were tested. The cutting force coefficients were computed from the experimental data. The results showed that the absolute value of the cutting force coefficients depended on the cutting edge geometry, cutting conditions and tool wear. Additionally, the relative increase in the cutting force coefficients during the tool lifetime was linear and independent of the cutting edge geometries and cutting conditions. The cutting force coefficient models with and without cross components were identified using the linear regression method. Comparison of both models is discussed in the paper. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|