Three-point bending strength of ceramics fused to cast titanium
| Autor: | Uwe Maiwald, L Pröbster, Heiner Weber |
|---|---|
| Rok vydání: | 1996 |
| Předmět: |
Dental Stress Analysis
Ceramics Materials science Surface Properties Carbotanium Three point flexural test Metal Ceramic Alloys chemistry.chemical_element Electrolytes chemistry.chemical_compound Flexural strength Materials Testing Ceramic Composite material Pliability General Dentistry Titanium Analysis of Variance Universal testing machine Bond strength Dental Bonding Temperature Polyethylene Elasticity Dental Veneers chemistry visual_art visual_art.visual_art_medium Chromium Alloys Stress Mechanical Polyethylenes |
| Zdroj: | European Journal of Oral Sciences. 104:313-319 |
| ISSN: | 1600-0722 0909-8836 |
| DOI: | 10.1111/j.1600-0722.1996.tb00083.x |
| Popis: | Titanium requires special ceramic systems for veneering. This study compared the three-point bending strength of three commercially available titanium ceramic systems with a NiCr-alloy with conventional ceramics. Three-point bend specimens 25 x 5 x 0.5 mm were cast from polyethylene patterns. After alpha-case removal, they were veneered with 8 x 5 x 1 mm of ceramics at the center of the bar. Specimens were tested in a universal testing machine without ageing, after thermocycling, and after 90 d storage in an electrolyte solution. Titanium-ceramic systems were found to have a significantly lower bond strength in comparison to the NiCr-ceramic system. One of the titanium ceramic systems had a significantly lower bond strength in comparison to the other systems investigated. It could be concluded that bonding between titanium and ceramics is obtainable; however, the achievable bonds strengths did not match the NiCr-ceramic control. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Plný text