A Stereo Calibration Method of Multi-Camera Based on Circular Calibration Board
Autor: | Xinhua Liu, Jie Tian, Hailan Kuang, Xiaolin Ma |
---|---|
Rok vydání: | 2022 |
Předmět: |
multi-target calibration
stereo calibration circular calibration board sub-pixel edge extraction Computer Networks and Communications Hardware and Architecture Control and Systems Engineering ComputerApplications_MISCELLANEOUS Signal Processing ComputingMethodologies_IMAGEPROCESSINGANDCOMPUTERVISION Electrical and Electronic Engineering |
Zdroj: | Electronics; Volume 11; Issue 4; Pages: 627 |
ISSN: | 2079-9292 |
Popis: | In the application of 3D reconstruction of multi-cameras, it is necessary to calibrate the camera used separately, and at the same time carry out multi-stereo calibration, and the calibration accuracy directly affects the effect of the 3D reconstruction of the system. Many researchers focus on the optimization of the calibration algorithm and the improvement of calibration accuracy after obtaining the calibration plate pattern coordinates, ignoring the impact of calibration on the accuracy of the calibration board pattern coordinate extraction. Therefore, this paper proposes a multi-camera stereo calibration method based on circular calibration plate focusing on the extraction of pattern features during the calibration process. This method preforms the acquisition of the subpixel edge acquisition based on Franklin matrix and circular feature extraction of the circular calibration plate pattern collected by the camera, and then combines the Zhang’s calibration method to calibrate the camera. Experimental results show that compared with the traditional calibration method, the method has better calibration effect and calibration accuracy, and the average reprojection error of the multi-camera is reduced by more than 0.006 pixels. |
Databáze: | OpenAIRE |
Externí odkaz: |