Chips Of Ti-6Al-2Sn-4Zr-6Mo Alloy – A Detailed Geometry Study

Autor: Dmytro Ostroushko, Karel Saksl, Carsten Siemers, Zuzana Rihova
Jazyk: angličtina
Rok vydání: 2012
Předmět:
ISSN: 0035-9696
DOI: 10.5281/zenodo.1081038
Popis: Titanium alloys like Ti-6Al-2Sn-4Zr-6Mo (Ti- 6246) are widely used in aerospace applications. Component manufacturing, however, is difficult and expensive as their machinability is extremely poor. A thorough understanding of the chip formation process is needed to improve related metal cutting operations.In the current study, orthogonal cutting experiments have been performed and theresulting chips were analyzed by optical microscopy and scanning electron microscopy.Chips from aTi- 6246ingot were produced at different cutting speeds and cutting depths. During the experiments, depending of the cutting conditions, continuous or segmented chips were formed. Narrow, highly deformed and grain oriented zones, the so-called shear zone, separated individual segments. Different material properties have been measured in the shear zones and the segments.
{"references":["R. Boyer, G. Welsch, E.W. Co llins, Materials Properties Handbook:\nTitanium Alloy, ASM INT. (1994)","J. Rösler, M. B├ñker and C. Siemers, Mechanisms of Chip Formation in\nH. K. Tönshoff and F. Hollmann (Eds.), Hochgeschwindigkeitsspanen,\nWiley-VCH, Weinheim, Germany, (2004).","C. Leyens and M. Peters, Titanium and Titanium Alloys - Fundamentals\nand Applications, 2003 WILEY-VCH Verlag GmbH & Co. KGaA,\nWeinheim, ISBN 3-527-30534-3","P. Rokicki, Analysis of high-speed machining titanium alloys, SAS\nSlovakia","P. Rokicki, K. Nowag, Z. Spotz, L. Fusova, J. Durisin, R. Ghisleni, C.\nSiemers, Microstructural characteristic of Ti-15V-3Al-3Sn-3Cr chips,\nRudy i Metale Niezelazne, R.55 /7 2010, ISSN 0035-9696","Carsten Siemers, Badya Zahra, Dawid Ksiezyk, Pawel Rokicki, Zden─øk\nSpotz, Lenka Fusova, Joachim Rösler, Karel Saksl, Chip Formationand\nMachinability of Nickel-Base Superalloys, Advanced Materials\nResearch (Volume 278) p.460-465Euro Superalloys 2010.","J. Goldstein, et al., Scanning Electron Microscopy and X-Ray\nMicroanalysis, Springer, 2003, pp. 271-293"]}
Databáze: OpenAIRE
Externí odkaz: