Trade-off between stress shielding and initial stability on an anatomical cementless stem shortening: in-vitro biomechanical study
| Autor: | Go Yamako, Koji Totoribe, Etsuo Chosa, Takero Sakamoto, Shinji Watanabe |
|---|---|
| Rok vydání: | 2014 |
| Předmět: |
Materials science
Calcar medicine.medical_treatment Arthroplasty Replacement Hip Biomedical Engineering Biophysics Strain (injury) Initial stability Anatomy Stress shielding medicine.disease Prosthesis Design Biomechanical Phenomena Stress (mechanics) Equipment Failure Analysis Materials Testing medicine Humans Femur Hip Prosthesis Reduction (orthopedic surgery) Biomedical engineering Fixation (histology) |
| Zdroj: | Medical engineeringphysics. 37(8) |
| ISSN: | 1873-4030 |
| Popis: | Shortened cementless femoral stems have become popular with the advent of minimally invasive total hip arthroplasty (THA). Successful THA requires initial stem stability and prevention of stress shielding-mediated bone loss, although the effect of stem shortening is controversial. Here we experimentally examined whether stem shortening affects stress shielding and initial stability. Anatomical stems (length, 120 mm) were cut to an 80 mm or 50 mm length. Ten tri-axial strain gauges measured the cortical strain on each stem-implanted femur to evaluate stress shielding. Two transducers measured axial relative displacement and rotation under single-leg stance loading. The 50 mm stem increased the equivalent strains with respect to the original stem in the proximal calcar region (31.0% relative to intact strain), proximal medial region (63.1%), and proximal lateral region (53.9%). In contrast, axial displacement and rotation increased with a decreasing stem length. However, the axial displacement of the 50 mm stem was below a critical value of 150 µm for bone ingrowth. Our findings indicate that, with regard to a reduction in stem length, there is a tradeoff between stress shielding and initial stability. Shortening the stem up to 50 mm can promote proximal load transfer, but bone loss would be inevitable, even with sufficient initial stability for long-term fixation. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect