Micron-pore-sized metallic filter tube membranes for filtration of particulates and water purification
| Autor: | Meghan S. McNeilly, R.R. Judkins, Tommy J. Phelps, Brian L. Bischoff, C.J. Miller, Lisa A. Fagan, Anthony V. Palumbo |
|---|---|
| Rok vydání: | 2007 |
| Předmět: |
Microbiology (medical)
Chromatography Aqueous solution Materials science Fouling Micropore Filters Portable water purification Filter (signal processing) Permeance Particulates Microbiology Water Purification Membrane Chemical engineering Metals Particle size Particle Size Molecular Biology Filtration |
| Zdroj: | Journal of microbiological methods. 74(1) |
| ISSN: | 0167-7012 |
| Popis: | Robust filtering techniques capable of efficiently removing particulates and biological agents from water or air suffer from plugging, poor rejuvenation, low permeance, and high backpressure. Operational characteristics of pressure-driven separations are in part controlled by the membrane pore size, charge of particulates, transmembrane pressure and the requirement for sufficient water flux to overcome fouling. With long term use filters decline in permeance due to filter-cake plugging of pores, fouling, or filter deterioration. Though metallic filter tube development at ORNL has focused almost exclusively on gas separations, a small study examined the applicability of these membranes for tangential filtering of aqueous suspensions of bacterial-sized particles. A mixture of fluorescent polystyrene microspheres ranging in size from 0.5 to 6 microm in diameter simulated microorganisms in filtration studies. Compared to a commercial filter, the ORNL 0.6 microm filter averaged approximately 10-fold greater filtration efficiency of the small particles, several-fold greater permeance after considerable use and it returned to approximately 85% of the initial flow upon backflushing versus 30% for the commercial filter. After filtering several liters of the particle-containing suspension, the ORNL composite filter still exhibited greater than 50% of its initial permeance while the commercial filter had decreased to less than 20%. When considering a greater filtration efficiency, greater permeance per unit mass, greater percentage of rejuvenation upon backflushing (up to 3-fold), and likely greater performance with extended use, the ORNL 0.6 microm filters can potentially outperform the commercial filter by factors of 100-1,000 fold. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect