The effect of catheters and coatings on the performance of palladium-nickel thermoseeds: evaluation and design of implantation techniques
| Autor: | G. J. Nieuwenhuys, N. Van Wieringen, J. van Veldhuizen, J. D. P. Van Dijk |
|---|---|
| Přispěvatelé: | Other departments |
| Jazyk: | angličtina |
| Rok vydání: | 1997 |
| Předmět: |
Ceramics
Cancer Research medicine.medical_specialty Hot Temperature Materials science Biocompatibility Physiology chemistry.chemical_element Biocompatible Materials Calorimetry Catheterization Magnetics Catheters Indwelling Nickel Physiology (medical) medicine Composite material Temperature control Temperature food and beverages Hyperthermia Induced Prostheses and Implants Surgery Catheter chemistry Ferromagnetism Electromagnetic shielding Curie temperature Material properties Plastics Palladium |
| Zdroj: | International journal of hyperthermia, 13(2), 187-204. Informa Healthcare |
| ISSN: | 0265-6736 |
| DOI: | 10.3109/02656739709012382 |
| Popis: | In the development of materials for self-regulating thermoseeds much effort is put in improvement of the self-regulating temperature control mechanism of the seeds. The catheters and coatings which are needed to implant the seeds or to guarantee biocompatibility, generally impair the optimized performance of the ferromagnetic seeds. The influence of various coatings on the performance of PdNi seeds has been investigated by means of one-dimensional modelling and calorimetric experiments. Implantation using thin walled catheters is acceptable provided that the catheters are filled with water to assure good thermal coupling. Air layers inside catheters should be avoided as they reduce the sharp gradient of the heat production at the Curie temperature significantly. An alternative for the application of catheters is to insert the seeds into metallic needles. The effect of shielding by the metal needle can be minimized by driving the seed into its saturated state using a high magnetic field strength. The thermal interaction between the seed and surrounding tissue can also be enhanced by placing PdNi, e.g. tubular, on the outside of the catheter or brachytherapy needle. An additional advantage of this new design is an increase in the heat production and the quality of temperature control due to an increase in the amount of PdNi. For permanent implantation seeds can be coated with an inert metal, ceramics or plastic. The performance of the seeds is not affected by any of the coatings if certain conditions are met. For plastic coatings the thickness of the coating has to be very thin, preferably |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|