Effect of Zeolite-Fe on graphite anode in electroactive biofilm development for application in microbial fuel cells
Autor: | Thaís González, José F. Marco, M.S. Ureta-Zañartu, Gladys Vidal |
---|---|
Přispěvatelé: | Fondo Nacional de Desarrollo Científico y Tecnológico (Chile), Comisión Nacional de Investigación Científica y Tecnológica (Chile) |
Rok vydání: | 2019 |
Předmět: |
Microbial fuel cell
Biofilm growth General Physics and Astronomy 02 engineering and technology Glassy carbon 010402 general chemistry Electrochemistry 01 natural sciences Chemistry Electrochemical characterization fungi Biofilm Anode modification Surfaces and Interfaces General Chemistry biochemical phenomena metabolism and nutrition 021001 nanoscience & nanotechnology Condensed Matter Physics 0104 chemical sciences Surfaces Coatings and Films Anode Dielectric spectroscopy Chemical engineering Zeolite Y Electrode Cyclic voltammetry 0210 nano-technology |
Zdroj: | Applied Surface Science Artículos CONICYT CONICYT Chile instacron:CONICYT Digital.CSIC. Repositorio Institucional del CSIC instname |
ISSN: | 0169-4332 |
DOI: | 10.1016/j.apsusc.2018.10.120 |
Popis: | 9 pags., 10 figs., 2 tabs. The performance of microbial fuel cells (MFCs) is highly dependent on the electrode materials. The electrode surface can be modified to provide a favorable environment for biofilms to enhance electron transfer from the bacteria to the anode. In this work, Faujasite zeolite-Y (ZY) was exchanged with iron (Fe) and was used to modify glassy carbon/graphite electrodes (GC/gr-ZY) evaluating its effect in electroactive biofilm development for application in microbial fuel cells. The novel material was evaluated as an anode in MFCs by comparing its performance with GC/gr and GC/gr-ZY electrodes. The results show that when using a GC/gr-ZY electrode, an electroactive biofilm with good electrochemical activity for acetate degradation can be generated on the electrode surface. The maximum current density obtained with a GC/gr-ZY-BF electrode (where BF is biofilm) was 7.7 times higher than that of a GC/gr anode. The modification generates a less hydrophobic electrode surface that facilitates microbial cell attachment, thereby improving bioelectricity production. By using scanning electron microscopy, a homogeneous microbial community with bacteria that had a similar short rod-shaped morphology was observed. Furthermore, electrochemical impedance spectroscopy demonstrated that the charge transfer resistance (R) decreased as the biofilm grew, revealing that the presence of the biofilm facilitated the electrochemical reaction. After 7 days of MFC operation, the GC/gr-ZY bioanode showed a reduction in R from 212.9 ± 1.81 Ω to 151.5 ± 1.46 Ω which was 2.4 times lower than that achieved with GC/gr. The biofilm on GC/gr-ZY was characterized using cyclic voltammetry, and the results showed a larger oxidation peak (169.8 μA cm) than that of the GC/gr electrode (36.5μA cm), further supporting the better electron-transfer properties of the modified electrode. Additionally, this result confirms the capability of biofilms to act as bioelectrocatalysts under acetate-oxidizing conditions. This work was supported by the grants CONICYT-PCHA/Doctorado Nacional/2015-211160606 from CONICYT (Chile), CONICYT/FONDAP/15130015 and FONDECYT 1140207. |
Databáze: | OpenAIRE |
Externí odkaz: |