Preparation of Expanded Chitin Foams and their Use in the Removal of Aqueous Copper
| Autor: | Katelyn Alley, Kristopher Bosch, Dario Prieto-Centurion, Kelli Thomas, Blaine Berrington, Katie Hailer |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Thermogravimetric analysis
Materials science Spectrophotometry Infrared Nitrogen General Chemical Engineering Catalyst support Chitin engineering.material General Biochemistry Genetics and Molecular Biology Water Purification chemistry.chemical_compound Adsorption X-Ray Diffraction Specific surface area Aqueous solution General Immunology and Microbiology General Neuroscience Temperature Water Reference Standards Chemical engineering chemistry Thermogravimetry engineering Crystallite Biopolymer Copper Water Pollutants Chemical |
| Zdroj: | Journal of Visualized Experiments. |
| ISSN: | 1940-087X |
| DOI: | 10.3791/62301 |
| Popis: | Chitin is an underexploited, naturally abundant, mechanically robust, and chemically resistant biopolymer. These qualities are desirable in an adsorbent, but chitin lacks the necessary specific surface area, and its modification involves specialized techniques and equipment. Herein is described a novel chemical procedure for expanding chitin flakes, derived from shrimp shell waste, into foams with higher surface area. The process relies on the evolution of H2 gas from the reaction of water with NaH trapped in a chitin gel. The preparation method requires no specialized equipment. Powder X-ray diffraction and N2-physisorption indicate that the crystallite size decreases from 6.6 nm to 4.4 nm and the specific surface area increases from 12.6 ± 2.1 m2/g to 73.9 ± 0.2 m2/g. However, infrared spectroscopy and thermogravimetric analysis indicate that the process does not change the chemical identity of the chitin. The specific Cu adsorption capacity of the expanded chitin increases in proportion to specific surface area from 13.8 ± 2.9 mg/g to 73.1 ± 2.0 mg/g. However, the Cu adsorption capacity as a surface density remains relatively constant at an average of 10.1 ± 0.8 atom/nm2, which again suggests no change in the chemical identity of the chitin. This method offers the means to transform chitin into a higher surface area material without sacrificing its desirable properties. Although the chitin foam is described here as an adsorbent, it can be envisioned as a catalyst support, thermal insulator, and structural material. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|