Extrusion of Solid Wood Impregnated with Phenol Formaldehyde (PF) Resin: Effect of Resin Content and Moisture Content on Extrudability and Mechanical Properties of Extrudate
| Autor: | Tomoaki Kiryu, Tsunehisa Miki, Masako Seki, Kozo Kanayama, Ichinori Shigematsu, Soichi Tanaka |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: |
0106 biological sciences
Moisture content Environmental Engineering Materials science lcsh:Biotechnology Formaldehyde Bioengineering Die swell Phenol formaldehyde resin medicine.disease_cause 01 natural sciences complex mixtures chemistry.chemical_compound stomatognathic system 010608 biotechnology Mold lcsh:TP248.13-248.65 medicine Composite material Waste Management and Disposal Water content 040101 forestry chemistry.chemical_classification Moisture Extrusion technology industry and agriculture 04 agricultural and veterinary sciences Solid wood Wood chemistry 0401 agriculture forestry and fisheries |
| Zdroj: | BioResources, Vol 11, Iss 3, Pp 7697-7709 (2016) |
| ISSN: | 1930-2126 |
| Popis: | A new deformation technique of wood flow forming is promising for industrial uses of solid wood. Flow deformability, size stability, and good mechanical properties were obtained by using wood impregnated with low molecular weight phenol formaldehyde (PF) resin. In this study, to clarify the effect of the PF resin and moisture contents in wood on the flow deformability (extrudability) and the mechanical properties of the product (extrudate), a lateral extrusion was conducted by using wood impregnated with various contents of PF resin and three levels of moisture content. The results indicated that the extrudability of wood impregnated with PF resin improved with an increase in both PF resin and moisture content. The mechanical properties of the extrudate worsened with increases in the moisture content of the wood impregnated with PF resin. Because most of the water in the wood remained in the mold during the extrusion process, chemical changes of the wood substance and PF resin occurred due to steam forming under the high temperature and pressure of the extrusion. The steam worsened the mechanical properties of the extrudate. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|