Geopolymeric Composite Materials Made of Sol-Gel Silica and Agroindustrial Wastes of Rice, Barley, and Coffee Husks with Wood-Like Finishing

Autor: Karina Rodríguez Espejel, José de Jesús Pérez Bueno, Coraquetzali Magdaleno López, Maria Luisa Mendoza López, Marcos Algara Siller, José Luis Reyes Araiza, Alejandro Manzano-Ramírez, Jorge Morales Hernández
Rok vydání: 2022
Předmět:
Zdroj: Sustainability; Volume 14; Issue 24; Pages: 16689
ISSN: 2071-1050
Popis: Geopolymers have been mainly utilized as structural materials; their chemical structure and morphologies have been explored for their potential as a high-performance material in emerging applications. Geopolymer composites reinforced with materials based on agro-waste are attracting interest in engineering applications due to their easy processing, low cost, low density, and high strength-to-weight ratio. This investigation pursues an experimental methodology that consists of a scheme to make composites with a geopolymer matrix and agro-waste (rice husk, barley, and coffee) as aggregate material, that can be applied in various fields of construction. The study was intended to determine the influence of adding various agro-wastes on the mechanical properties of the geopolymer. According to the respective ASTM standards, the materials obtained were prepared and analyzed to determine their compressive strength, flexural strength, hardness and scanning electron microscopy (SEM)-determined characteristics. The results revealed that, for the compression tests, the composites formed by a sol-gel matrix and barley husk showed a better yield, obtaining the highest value of 3.5 N/mm2. Concerning hardness testing, the composites with a geopolymer matrix and coffee husks obtained higher values compared to the other composites. For the flexural tests, the compounds with the sol-gel/fly ash matrix obtained the highest yield stress value, which was 5.25 MPa with an elastic modulus of 7.59 GPa. The results of the microstructural analysis showed good husk-matrix interaction, together with failure mechanisms. The conformation of such waste-based compounds may enable them to replace natural wood in some applications, such as in the finishing of interiors of homes, during the final stages in the construction of buildings, or in the decoration of inhabited houses, as well as in finishing in the manufacture of furniture.
Databáze: OpenAIRE