Crimped fiber with controllable patterns fabricated via electrohydrodynamic jet printing

Autor: Yoke San Wong, Bin Wu, Sanjairaj Vijayavenkataraman, Jerry Y. H. Fuh, Yang Wu
Jazyk: angličtina
Rok vydání: 2017
Předmět:
Zdroj: Materials & Design, Vol 131, Iss, Pp 384-393 (2017)
ISSN: 0264-1275
Popis: A regular pattern called crimp is an essential morphological feature of collagen fibers in native tendon. In this study, a crimped fiber writing process based on electrohydrodynamic jet printing (E-jetting) has been developed to fabricate fibers with crimped morphology. The effects of the key process parameters (i.e. segment length, stage speed and dwell time) on the fiber characteristics were investigated to obtain controllable and regular crimped fibers. The induced crimp angle (~15°) and fiber diameter (~45 μm) using the optimal process parameters were comparable to those in the native tendons (i.e. 13–17° and 15–30 μm, respectively). Mechanical testing showed that the crimped fibers exhibited an initial nonlinear region and a subsequent linear region with different Young's modulus (22.6 ± 2.2 MPa and 33.2 ± 6.5 MPa, respectively), while the straight fibers were found only with a linear region. Human tenocytes cultured on the crimped fibers exhibited the aligned morphology with a broader and controllable nuclei angle distribution, as compared to those on the straight fibers. This study indicates the capability of crimped fiber writing to create fibers with controllable crimped morphology and biomimetic mechanical behaviors, demonstrating its potential in application of tissue engineering. Keywords: Crimp-like pattern, Electrohydrodynamic jet printing, Tissue engineering, Cell alignment
Databáze: OpenAIRE
Externí odkaz: