FE Prediction of Hysteretic Component of Rubber Friction
| Autor: | J. M. Bielsa, Károly Váradi, Tibor Goda, M. A. Jiménez, E. Garbayo, László Pálfi |
|---|---|
| Rok vydání: | 2012 |
| Předmět: |
Materials science
Article Subject lcsh:Mechanical engineering and machinery Mechanical Engineering Loss factor Dynamic mechanical analysis Mechanics Viscoelasticity Surfaces Coatings and Films Superposition principle Wavelength Sine wave Classical mechanics Natural rubber visual_art visual_art.visual_art_medium Surface roughness lcsh:TJ1-1570 |
| Zdroj: | Advances in Tribology, Vol 2012 (2012) |
| ISSN: | 1687-5923 1687-5915 |
| DOI: | 10.1155/2012/807493 |
| Popis: | The hysteretic part of the friction coefficient for rubber sliding on an ideal rigid, rough surface has been investigated by FE technique. The FE models were created by using two different FE softwares, ABAQUS and MSC.MARC. The surface roughness has been considered by using two different sine waves having a wavelength of 100 μm and 11.11 μm, as well as their superposition. Parameters of the viscoelastic material models of the rubber were gained, firstly from a fit to the measured storage modulus, secondly from a fit to the measured loss factor master curve of the rubber. The effect of viscoelastic material models, comparing 10-term and 40-term generalized Maxwell models was also considered together with the temperature effect between −50 and150°C. According to the results, both postprocessing methods, namely, the reaction force and the energy-based approach, show very similar coefficients of friction. The 40-term Maxwell model fitted to both the storage modulus and loss factor curve provided the most realistic results. The tendency of the FE results has been explained by semianalytical theory. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|