Alpha-tocopherol-doped irradiated UHMWPE for high fatigue resistance and low wear
| Autor: | Keith K. Wannomae, Ebru Oral, Orhun K. Muratoglu, William H. Harris, Nathaniel Hawkins |
|---|---|
| Rok vydání: | 2003 |
| Předmět: |
Antioxidant
Materials science Spectrophotometry Infrared medicine.medical_treatment Doping alpha-Tocopherol Biophysics Bioengineering Fatigue limit Accelerated aging Biomaterials Diffusion Fatigue resistance Ultrahigh molecular weight polyethylene Mechanics of Materials Materials Testing Ceramics and Composites medicine Irradiation Tocopherol Composite material Polyethylenes Oxidation-Reduction |
| Zdroj: | Biomaterials. 25(24) |
| ISSN: | 0142-9612 |
| Popis: | Longevity of total joints has been compromised by wear and fatigue of ultrahigh molecular weight polyethylene (UHMWPE) components. Crosslinking reduces UHMWPE wear, but combined with postirradiation melting, also reduces its fatigue strength, therefore limiting its use in high-stress applications. We hypothesized that a lipophilic antioxidant (alpha-tocopherol, alpha-T) can protect UHMWPE against oxidation eliminating the need for postirradiation melting of crosslinked UHMWPE and improve its fatigue strength. To test these hypotheses, 65- and 100-kGy irradiated, alpha-T-doped and subsequently gamma-sterilized UHMWPE were used. (I) alpha-T-doped irradiated UHMWPEs showed significantly lower oxidation levels (0.48+/-0.25 and 0.44+/-0.06) compared to 100-kGy irradiated UHMWPE (3.74+/-0.16) after 5 weeks of accelerated aging at 80 degrees C in air. (II) Wear rate of alpha-T-doped irradiated UHMWPE (1.9+/-0.5, and 0.9+/-0.1mg/million cycles (MC) for 65- and 100-kGy irradiated UHMWPE, respectively) were comparable to that of 100-kGy irradiated/melted UHMWPE (1.1+/-0.7mg/million cycles). (III) The stress intensity factor at crack inception ( DeltaKi) of 100-kGy irradiated UHMWPE increased significantly upon doping with alpha-T from 0.74 to 0.87MPam(1/2) ( p |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect