Effect of Mixing Strategy on the Structure-Properties of the PLA/PBAT Blends Incorporated with CNC
| Autor: | Emre Vatansever, Dogan Arslan, Yusuf Kahraman, Deniz Sema Sarul, Ali Durmus, Reza Salehiyan, Mohammadreza Nofar |
|---|---|
| Rok vydání: | 2022 |
| Předmět: |
Materials science
nanocomposite Materials Science (miscellaneous) Dispersion Interface Environmental Science (miscellaneous) Polylactide Poly(Lactic Acid) cellulose nanocrystals blend Selective Localization Nanocomposites Cellulose Nanocrystals Polymer Blends Chemical engineering morphology Morphology Development poly(butylene adipate-co-terephthalate) rheology Carbon Nanotubes Organoclay Mixing (physics) |
| Zdroj: | Journal of Renewable Materials. 10:149-164 |
| ISSN: | 2164-6341 |
| DOI: | 10.32604/jrm.2022.017003 |
| Popis: | Polylactide (PLA)/poly (butylene adipate-co-terephthalate) (PBAT) blend nanocomposites including 3 wt% of cel-lulose nanocrystals (CNCs) were prepared by melt compounding method in a twin-screw extruder and an inter-nal mixer. Blend nanocomposites were formulated by diluting three different masterbatches prepared by solution casting method that contained 7 wt% of CNC. These masterbatches were: (m1) PLA/PBAT/CNC masterbatch; (m2) PLA/CNC masterbatch; and (m3) PBAT/CNC masterbatch. These were to explore how different prepara-tion methods affect the dispersion and localization of CNC and hence the properties of PLA/PBAT/CNC blend nanocomposites. Scanning electron microscopy (SEM) was used to study the structural changes of the blends. Rheological properties of PLA/PBAT blends and PLA/PBAT/CNC blend nanocomposites were also investigated. In the samples prepared by internal mixer, the rheological behavior of blend nanocomposite prepared through premixing of CNC particles with PLA showed a transition from liquid-like to a gel-like behavior. According to the rheological results and differential scanning calorimetry (DSC) analysis, it was found that the CNC overall enhanced the viscoelastic properties of blends and improved the PLA crystallization, respectively. Dynamic mechanical analysis (DMA) illustrated that the incorporation of CNC also enhanced the elastic modulus of PLA/PBAT blends specifically above the glass transition temperature of PLA. The expected improvements in mechanical properties did not occur due to the possible existence of residual solvent in the blends. Scientific and Technological Research Council of Turkey (TUBITAK)Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [117M238] The authors would like to acknowledge the financial supports by the Scientific and Technological Research Council of Turkey (TUBITAK) in the Context of 1001 Project with the Project No. of 117M238. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|