Improving the surface finish of concave and convex surfaces using a ball burnishing process
| Autor: | J.A. Travieso-Rodriguez, Gilles Dessein, Hernán Alberto González-Rojas |
|---|---|
| Přispěvatelé: | Mechanical Engineering Department (Barcelona. Spain), Universitat Politècnica de Catalunya [Barcelona] (UPC), Laboratoire Génie de Production (LGP), Ecole Nationale d'Ingénieurs de Tarbes, Institut National Polytechnique de Toulouse - Toulouse INP (FRANCE), Universitat Politècnica de Catalunya - UPC (SPAIN), Institut National Polytechnique de Toulouse - INPT (FRANCE) |
| Jazyk: | angličtina |
| Rok vydání: | 2011 |
| Předmět: |
0209 industrial biotechnology
Materials science chemistry.chemical_element Mechanical engineering 02 engineering and technology Surface finish Burnishing Burnishing (metal) Industrial and Manufacturing Engineering 020901 industrial engineering & automation 0203 mechanical engineering Aluminium Concave surface Surface roughness General Materials Science [SPI.GPROC]Engineering Sciences [physics]/Chemical and Process Engineering Génie des procédés Mechanical Engineering Metallurgy Regular polygon Roughness Surface Manufacturing 020303 mechanical engineering & transports chemistry Mechanics of Materials Ball (bearing) |
| Zdroj: | Materials and Manufacturing Processes Materials and Manufacturing Processes, Taylor & Francis, 2011, vol. 26, pp. 1494-1502. ⟨10.1080/10426914.2010.544819⟩ |
| ISSN: | 1042-6914 1532-2475 |
| Popis: | International audience; The ball burnishing process is done to improve the surface finish of workpieces that have been previously machined. In this article we present the results of tests performed with this process that was applied to workpieces with a convex or concave surface of two different materials: aluminum A92017 and steel G10380. An experiment to do the tests was designed. The results of measurements of surface roughness are presented in this paper as well. These results are compared to those measured in the workpieces before being burnished. After that conclusions are drawn about the improvement of surface roughness applied to the workpieces through the ball burnishing process. The main innovation of this paper is that we work with concave and convex geometries. We also obtain a table of recomended parameter values for the process. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|