Accurate 2-D Modelling of Transonic Compressor Cascade Aerodynamics
| Autor: | Andrea Magrini, Tommaso Piovesan, Ernesto Benini |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2019 |
| Předmět: |
Flow visualization
Supersonic wind tunnel lcsh:Motor vehicles. Aeronautics. Astronautics Aerospace Engineering ARL-SL19 transonic compressor CFD validation parametric analysis 02 engineering and technology 01 natural sciences 010305 fluids & plasmas Physics::Fluid Dynamics symbols.namesake 0203 mechanical engineering 0103 physical sciences Physics Aerodynamics Mechanics Static pressure 020303 mechanical engineering & transports Mach number Cascade symbols Solidity lcsh:TL1-4050 Transonic |
| Zdroj: | Aerospace, Vol 6, Iss 5, p 57 (2019) Aerospace Volume 6 Issue 5 |
| Popis: | Modern aeronautic fans are characterised by a transonic flow regime near the blade tip. Transonic cascades enable higher pressure ratios by a complex system of shockwaves arising across the blade passage, which has to be correctly reproduced in order to predict the performance and the operative range. In this paper, we present an accurate two-dimensional numerical modelling of the ARL-SL19 transonic compressor cascade. A large series of data from experimental tests in supersonic wind tunnel facilities has been used to validate a computational fluid dynamic model, in which the choice of turbulence closure resulted critical for an accurate reproduction of shockwave-boundary layer interaction. The model has been subsequently employed to carry out a parametric study in order to assess the influence of main flow variables (inlet Mach number, static pressure ratio) and geometric parameters (solidity) on the shockwave pattern and exit status. The main objectives of the present work are to perform a parametric study for investigating the effects of the abovementioned variables on the cascade performance, in terms of total-pressure loss coefficient, and on the shockwave pattern and to provide a quite large series of data useful for a preliminary design of a transonic compressor rotor section. After deriving the relation between inlet and exit quantities, peculiar to transonic compressors, exit Mach number, mean exit flow angle and total-pressure loss coefficient have been examined for a variety of boundary conditions and parametrically linked to inlet variables. Flow visualisation has been used to describe the shock-wave pattern as a function of the static pressure ratio. Finally, the influence of cascade solidity has been examined, showing a potential reduction of total-pressure loss coefficient by employing a higher solidity, due to a significant modification of shockwave system across the cascade. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|