A comparison between the stabilization of premixed swirling CO2-diluted methane oxy-flames and methane/air flames

Autor: Thierry Schuller, Jean Caudal, Paul Jourdaine, A. Lo, Clément Mirat
Přispěvatelé: Laboratoire d'Énergétique Moléculaire et Macroscopique, Combustion (EM2C), Université Paris Saclay (COmUE)-Centre National de la Recherche Scientifique (CNRS)-CentraleSupélec, Air Liquide, Centre de Recherche Claude-Delorme, Paris-Saclay, France., Air Liquide, Ecole Centrale Paris and CNRS Chair on oxy-combustion and heat transfer for energy and environment, OXYTEC project from l'Agence Nationale de la RechercheFrench National Research Agency (ANR) [ANR-12-CHIN-0001]
Jazyk: angličtina
Rok vydání: 2017
Předmět:
Zdroj: Fuel
Fuel, Elsevier, 2017, 201, pp.156-164. ⟨10.1016/j.fuel.2016.11.017⟩
ISSN: 0016-2361
1873-7153
Popis: International audience; Revamp of air powered industrial boilers to oxy-combustion operation raises several issues. In this study, the stabilization of CO2-diluted premixed swirling CH4/O-2 flames is compared to operation with CH4/air flames by a set of experiments in a generic labscale combustor equipped with an axial-plus-tangential swirler. The investigated flames are stabilized aerodynamically within the swirling flow without help of any solid anchoring device. The structure of the turbulent swirling flames is examined by recording their OH* chemiluminescence. Laser induced OH fluorescence measurements are carried out to delineate the location of the flame front and burnt gases and infer the shape taken by the flame. Particle imaging velocimetry measurements reveal the corresponding velocity field. The temperature is also recorded with thermocouples in the internal and the external recirculation zones of the flow and inside the combustion chamber walls. These diagnostics reveal similarities between the topology of CH4/air and CH4/O-2/CO2 flames near their stabilization point. For a fixed swirl number, it is found that N-2- and CO2-diluted CH4/O-2 flames at the same equivalence ratio feature very similar shapes provided the adiabatic flame temperature and the ratio of bulk velocity to laminar burning velocity are kept the same although the absolute value of bulk velocity and the general velocity level inside the combustor are different. This result was found for injection Reynolds numbers varying from Re = 8500-28000 and for swirl numbers ranging from So = 0.5 to 1.2. The operability range of well stabilized CO2-diluted flames is however reduced. It is also found that the temperature of the burnt gases in the outer recirculation zone differs between the CO2- and N-2 diluted combustible mixtures sharing the same adiabatic temperature, but this does not affect the stabilization of the flames near the burner outlet, the temperature in the burnt gases and inside the combustor sidewalls. The flame leading edge is stabilized on average off-axis due to the structure of the W axial velocity profile produced by the axial-plus-tangential swirler at the burner outlet. This study indicates that CO2-diluted CH4/O-2 premixed swirling flames can be stabilized with similar shapes as CH4/air flames without design modification provided the suggested similarity is obeyed.
Databáze: OpenAIRE
Externí odkaz: