Effect of Modifying Additives on Mechanical Properties of Refractory Concrete
| Autor: | Kristina Brinkiene, Jurate Cesniene, Violeta Matulioniene, Algis Makstys, Regina Kalpokaite-Dickuviene |
|---|---|
| Rok vydání: | 2012 |
| Předmět: |
cement
lcsh:TN1-997 Cement Materials science Silica fume compressive strength high temperature refractory Compressive strength Flexural strength silica flexural strength fibre Mechanical strength concrete General Materials Science Composite material lcsh:Mining engineering. Metallurgy Refractory (planetary science) |
| Zdroj: | Medžiagotyra, Vol 18, Iss 3, Pp 290-295 (2012) |
| ISSN: | 1392-1320 |
| Popis: | This experimental study presents the results of the combined effect of micro fibre and micro silica content on physical and mechanical properties of refractory concrete after exposure to high temperatures. A complex binder together with firestone aggregates was used for production of refractory concrete, which was reinforced simultaneously with micro fibre (1 wt % and 3 wt %) and micro silica (1.5 wt %, 3.5 wt % and 5 wt %). Unmodified concrete was produced as well. The results show that simultaneous modification with micro silica and micro fibre improves the flexural strength of the refractory concrete at all the temperatures investigated: 100 °C, 600 °C, 800 °C and 1000 °C. Contrary, the advantage of reinforcing agents on cold crushing strength of concrete was observed above 800 °C. It was determined that the mechanical strength of the refractory concrete increases with the increasing content of micro silica and reduces with the increasing content of micro fibre.DOI: http://dx.doi.org/10.5755/j01.ms.18.3.2442 |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|