Experimental results of a national technical assessment procedure on commercial FRP for structural strengthening: wet-lay-up systems
| Autor: | Francesca Ceroni, Annalisa Franco, Antonio Bonati, Piera Salzano, Antonio Occhiuzzi |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: |
Technical assessment
Computer science Probabilistic logic Young's modulus 020101 civil engineering FRP wet-lay-up systems 02 engineering and technology Building and Construction Fibre-reinforced plastic 021001 nanoscience & nanotechnology Construction engineering 0201 civil engineering Tensile strength Mechanics of Materials Statistical analyses Qualification testing General Materials Science Probabilistic models Young’s modulus 0210 nano-technology Civil and Structural Engineering |
| Zdroj: | Materials and structures 53 (2020). doi:10.1617/s11527-020-1439-5 info:cnr-pdr/source/autori:Occhiuzzi A.; Ceroni F.; Franco A.; Salzano P.; Bonati A./titolo:Experimental results of a national technical assessment procedure on commercial FRP for structural strengthening: wet-lay-up systems/doi:10.1617%2Fs11527-020-1439-5/rivista:Materials and structures/anno:2020/pagina_da:/pagina_a:/intervallo_pagine:/volume:53 |
| DOI: | 10.1617/s11527-020-1439-5 |
| Popis: | The paper shows the results of a large experimental activity for the qualification of wet-lay-up FRP products for structural repair and/or strengthening, required by the Italian national approval authority. The qualification procedure and the correspondent design rules are described in national guidelines. The analysis of the experimental results of a large number of qualification tests allows to highlight some aspects in the national procedure that could be addressed in a future revision of the guidelines. In particular, statistical analyses were carried out in order to assess the most suitable probabilistic models able to describe the experimental distribution of the tensile strength and the Young’s modulus of FRP wet-lay-up materials falling in the same class. The analyses were developed with reference to both ordinary and artificial environmental conditions. Nevertheless the paper is focussed on the case of wet-lay-up FRP materials, it can be considered exemplary of a problem common to other products. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|