| Popis: |
An important problem of modern aero-engines’ construction is effective cooling of combustor liner attained by effusion holes. The laser-drilled channels are a critical metrological challenge resulting from their small diameter (below 1 mm), irregular shape and angular orientation to the surface. Hence, in this case, the tactile CMM measurement methods are timeconsuming, error-susceptible and hazardous to the measuring stylus. The paper compares two methods of triangulation scanning of the surface of the engine combustion chamber with angular effusion holes (according to normal to surface and coaxially with hole). Additionally, four algorithms for processing measurement data were developed and evaluated, aiming at determination of the position and holes diameter. The paper also discusses the problem of measurement and calculation disturbance. |
