Thermally driven pumps and diodes in multistage assemblies consisting of microchannels with converging, diverging and uniform rectangular cross sections

Autor: Marcos Rojas-Cárdenas, Christine Barrot, Lucien Baldas, Stéphane Colin, Guillermo López Quesada, Dimitris Valougeorgis, Giorgos Tatsios
Přispěvatelé: Institut Clément Ader (ICA), Institut Supérieur de l'Aéronautique et de l'Espace (ISAE-SUPAERO)-Institut National des Sciences Appliquées - Toulouse (INSA Toulouse), Institut National des Sciences Appliquées (INSA)-Université de Toulouse (UT)-Institut National des Sciences Appliquées (INSA)-Université de Toulouse (UT)-Université Toulouse III - Paul Sabatier (UT3), Université de Toulouse (UT)-Centre National de la Recherche Scientifique (CNRS)-IMT École nationale supérieure des Mines d'Albi-Carmaux (IMT Mines Albi), Institut Mines-Télécom [Paris] (IMT)-Institut Mines-Télécom [Paris] (IMT), University of Thessaly [Volos] (UTH), European Project: 643095,H2020,H2020-MSCA-ITN-2014,MIGRATE(2015), Institut National des Sciences Appliquées - Toulouse (INSA Toulouse), Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS)-Université Toulouse III - Paul Sabatier (UT3), Université Fédérale Toulouse Midi-Pyrénées-Université Fédérale Toulouse Midi-Pyrénées-IMT École nationale supérieure des Mines d'Albi-Carmaux (IMT Mines Albi), Institut Mines-Télécom [Paris] (IMT)-Institut Mines-Télécom [Paris] (IMT)-Institut Supérieur de l'Aéronautique et de l'Espace (ISAE-SUPAERO)
Jazyk: angličtina
Rok vydání: 2020
Předmět:
Zdroj: Microfluidics and Nanofluidics
Microfluidics and Nanofluidics, 2020, 24 (7), pp.54. ⟨10.1007/s10404-020-02357-z⟩
Microfluidics and Nanofluidics, Springer Verlag, 2020, 24 (7), pp.54. ⟨10.1007/s10404-020-02357-z⟩
ISSN: 1613-4982
1613-4990
DOI: 10.1007/s10404-020-02357-z⟩
Popis: International audience; Thermal transpiration pumping in multistage assemblies is computationally investigated. Each stage is formed by combining in series-long microchannels with (a) uniform–uniform (“uni–uni”), (b) converging–uniform (“con–uni”), (c) diverging–uniform (“div–uni”) and (d) converging–diverging (“con–div”) rectangular cross sections. In all four investigated assemblies the generated pressure difference with the associated mass flow rate is fully assessed, in terms of inlet pressure, inclination parameter and number of stages. The analysis is based on linear kinetic modeling and is valid in the whole range of gas rarefaction. It is concluded that the “con–uni” and “div–uni” assemblies provide higher pressure differences and lower mass flow rates than the “uni–uni” assembly and they may be more suitable for specific pumping applications. The characteristics of the “con–uni” and “div–uni” assemblies are very close to each other. The multistage “uni–uni”, “con–uni” and “div–uni” assemblies are more stable when operating at small inlet pressures, where the pressure difference remains almost constant in wide ranges of mass flow rate. It is advisable to add as many stages as possible to increase, depending on the application, either the pressure difference or mass flow rate or both. Furthermore, the “con–div” assembly provides smaller pressure differences and mass flow rates than the other three, but it is suitable for diode applications. It is characterized by the so-called blocking inlet pressure, where the deduced pressure difference in the converging and diverging channels is the same. A detailed parametrization of the blocking inlet pressure in terms of inclination ratio, mean height, temperature difference and gas species, has been performed. It is concluded that multistage “con–div” assemblies may be ideally applied as thermally driven microfluidic diodes to control or block the flow, as well as to separate the species in multicomponent gas mixtures.
Databáze: OpenAIRE
Externí odkaz: