Study on Structural Performance of Horizontal Axis Wind Turbine with Air Duct for Coal Mine
| Autor: | Xiaohong Gui, Haiteng Xue, Ripeng Gao, Xingrui Zhan, Fupeng Zhao |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: |
intelligent coal mine
static structure Technology Control and Optimization Renewable Energy Sustainability and the Environment Energy Engineering and Power Technology wind turbine blades modal analysis dynamic performance Physics::Fluid Dynamics Electrical and Electronic Engineering Engineering (miscellaneous) Energy (miscellaneous) |
| Zdroj: | Energies, Vol 15, Iss 225, p 225 (2022) Energies; Volume 15; Issue 1; Pages: 225 |
| ISSN: | 1996-1073 |
| Popis: | Considering the characteristics of narrow underground space and energy distribution, based on blade element momentum theory, Wilson optimization model and MATLAB programming calculation results, the torsion angle and chord length of wind turbine blade under the optimized conditions were obtained. Through coordinate transformation, the data were transformed into three-dimensional form. The three-dimensional model of the blade was constructed, and the horizontal axis wind turbine blade under the underground low wind speed environment was designed. The static structural analysis and modal analysis were carried out. Structural design, optimization calculation and aerodynamic analysis were carried out for three kinds of air ducts: external convex, internal concave and linear. The results show that the velocity distribution in the throat of linear air duct is relatively uniform and the growth rate is large, so it should be preferred. When the tunnel wind speed is 4.3 m/s and the rated speed is 224 rad/s, the maximum displacement of the blade is in the blade tip area and the maximum stress is at the blade root, which is not easy to resonate. The change rate of displacement, stress and strain of blade is positively correlated with speed. The energy of blade vibration is mainly concentrated in the swing vibration of the first and second modes. With the increase in vibration mode order, the amplitude and shape of the blade gradually transition to the coupling vibration of swing, swing and torsion. The stress and strain of the blade are lower than the allowable stress and strain of glass fiber reinforced plastics (FRP), and resonance is not easy to occur in the first two steps. The blade is generally safe and meets the design requirements. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|