Normal operation and reverse action of on-load tap changing transformer with its effect on voltage stability
| Autor: | Sinan Moayad A. Alkahdely, Ahmed Nasser B. Alsammak |
|---|---|
| Rok vydání: | 2023 |
| Předmět: |
Voltage collapse
OLTC Control and Optimization Performance improvement Computer Networks and Communications Transformer reverse action MATLAB/Simulink Voltage stability Hardware and Architecture Control and Systems Engineering Computer Science (miscellaneous) Electrical and Electronic Engineering Instrumentation Information Systems |
| Zdroj: | Bulletin of Electrical Engineering and Informatics. 12:650-658 |
| ISSN: | 2302-9285 2089-3191 |
| DOI: | 10.11591/eei.v12i2.4556 |
| Popis: | As electrical grids have expanded significantly, so too has the load on network buses. This, however, causes voltage drops to occur at the load side of the grid. A voltage drop causes a system to become unstable, increases its power loss, and reduces the amount of power that it transfers before finally leading to a collapse. An on-load tap changing (OLTC) transformer can be used to prevent the negative effects of an increased load by restoring the load voltage to its base value when sudden disturbances occur in the source. However, incorrect OLTC placement can cause the system to become unstable and cause collapse. This is referred to as the reverse action phenomenon of an OLTC. Therefore, this present study examined improving the ability of an OLTC to increase system stability and prevent collapse. A simple radial power distribution system was modelled in MATLAB. The results indicate that the proposed model can increase system stability and prevent collapse. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|